Interlux Paint
Interlux Interprotect Epoxy Barrier Coat Kit - Gray
Interlux Interprotect Epoxy Barrier Coat Kit - Gray
Couldn't load pickup availability
Interlux Interprotect Epoxy Barrier Coat Kit - Gray
Applying Interlux 200E can help protect hulls from damaging water absorption that can cause long-term, costly repairs to your boat. Interprotect 200E is a two-part epoxy coating that will provide protection for your new and used fiberglass hulls by providing an overlapping barrier of microplates to keep water from penetrating the boat’s exterior coating.
Interlux Interprotect 200E is fast drying, and both parts can be applied in two days. It is formulated for easy application without sagging or running. This Interlux 200E epoxy coating can be used above or below the waterline and also works well as a universal primer on most surfaces. Interlux 200E is ideal for repairing damaged gel coats as a result of osmotic blistering. Made with anti-corrosive materials, it protects metal as well from rust and corrosion.
Features:
- Great for preventing and repairing gel coat blistering
- Use on underwater metals, hulls, and keels
- Easy application, fast-drying, no sanding needed
- Offers excellent anti-corrosive protection above and below the waterline
Specifications:
- Finish: Matte
- Number of Coats: 1-5
- Mix Ratio: 3:1 by volume
- Application Methods: Airless spray, brush, spray, roller
Associated Products:
Interlux Reducing Solvent - Spray: Thinner for spray application & clean-up
Interlux Reducing Solvent - Brush: Thinner for brush application & clean-up
How To Apply Interlux InterProtect 2000E
Apply InterProtect to clean, dry, and properly prepared surfaces only. Do not apply over one part paints. Prior to application, stir or shake individual components thoroughly. Add curing agent to the base at 1 part curing agent to 3 parts base (by volume). Stir and leave for 20 minutes induction time and to allow the bubbles to disperse. If thinning is needed, add thinner after the induction time.
- Application Method: Airless Spray, Brush, Conventional Spray, Roller
- Number of Coats: 4-5 To Reach a 10 mils dry
- Dry Film Thickness per Coat: 2.6 mils (5.4 wet mils)
- Coverage: 240 sq. ft/gal.
- Application Temp: 41°F Min. / 95°F Max.
- Thinner: Reducing Solvent 2316N or Brushing Liquid 2333N
| Temp | To Touch | Immersion |
| 95°F | 1/2 hrs | 8 hrs |
| 73°F | 2 hrs | 12 hrs |
| 50°F | 3 hrs | 24 hrs |
Surface Preparation
- Bare Fiberglass or Epoxy
- Remove all surface contamination using Fiberglass Surface Prep YMA601
- Flush with fresh water, then allow to dry.
- Sand with 80 grit paper then remove sanding residue.
- Wipe with Fiberglass Solvent Wash 202.
- Steel
- Degrease by wiping with a rag soaked in Fiberglass Solvent Wash 202.
- Grit blast to near white metal surface. A surface profile of 2-3 mils is recommended.
- If grit blasting is not possible, grind the surface with a 36 grit grinding disc or sand with 40-60 grit sandpaper.
- Bring the surface to a uniform, clean, bright metal surface with a surface profile of 2-3 mils.
- Remove sanding residue and immediately apply a coat of InterProtect 2000E, thinned 15-20%.
- Apply 4-5 additional coats of InterProtect 2000E.
- Aluminum
- Degrease by wiping with a rag soaked in Fiberglass Solvent Wash 202.
- Grit blast, grind with a 36 grit disc, or sand with 40-60 grit sandpaper. If grit blasting, use aluminum-compatible materials.
- Bring the surface to a uniform, clean, bright metal surface. Surface profile of 2-3 mils is recommended.
- Remove sanding residue.
- Within 1 hour of preparing surface, apply a coat of InterProtect 2000E thinned 15-20% with the correct thinner.
- Apply 4-5 additional coats of InterProtect.
- Bare Wood
- Sand with 80-180 grade paper.
- Remove oil from oil woods (ex teak) using Special Thinner 216 or 2316N.
- Change rags frequently.
Application Information
- When applying via brush, use a natural bristle brush
- When applying via roller, use a 3/8" nap solvent-resistant roller
- For airless spray application, use tip size 1880-2680, 0.44-0.53mm/60-70 thou. and 2400psi pressure.
- When overcoating with VC 17m or VC 17m Extra, allow InterProtect to dry for 24-36 hours, then sand with 180-220 grit sand paper.
- If filling is required, use appropriate filler after the first coat of Interprotect 2000E has been applied.
- Only 1 coat is required when used as a tie coat over Interprime 450 VOC.
| Overcoated By | 41°F | 50°F | 73°F | 95°F | ||||
| Min | Max | Min | Max | Min | Max | Min | Max | |
| ACT | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs | ||
| Epoxy Primekote | 16 hrs | 24 hrs | 6 hrs | 16 hrs | 4 hrs | 10 hrs | ||
| Fiberglass Bottomkote NT | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs | ||
| Interlux Antifouling | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs | ||
| Interprotect 2000E | 10 hrs | 6 mths | 5 hrs | 6 mths | 3 hrs | 6 mths | 2 hrs | 6 mths |
| Micron 66 | 10 hrs | 24 hrs | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs |
| Micron Extra w/Biolux | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs | ||
| Trilux 33 | 10 hrs | 24 hrs | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs |
| Ultra w/Biolux | 7 hrs | 9 hrs | 5 hrs | 7 hrs | 3 hrs | 5 hrs | ||
| Watertite | > 4 hrs | 18 hrs | 4 hrs | 18 hrs | 4 hrs | 18 hrs | ||
California Residents: 
WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
